Techno Press

Home

Editors-in-Chief
Hong-Nan Li

    Faculty of Infrastructure Engineering
    Dalian University of Technology
    Dalian 116024, China
    Satish Nagarajaiah

    Dept. of Civil and Environmental Eng.
    Rice University
    Houston TX 77005, USA
    Jeong-Tae Kim

    Ocean Engineering Dept
    Pukyong National University
    Busan 608-737, Korea

Associate Editor
Ting-Hua Yi

    School of Civil Engineering
    Dalian University of Technology
    Dalian 116023, China

Managing Editor
Prof. Chang-Koon Choi

Korea Advanced Institute of Science & Technology
Daejeon 305-701, Korea

ESCI

SCOPUS

ISSN:2288-6605(Print) ISSN:2288-6613(Online)

Vol 7(4 issues) for 2020, Quarterly

Aims and Scope

The Structural Monitoring and Maintenance, An International Journal, aims at the valuable source of information and excellent publication channel for the global community of structural monitoring and maintenance of structures.

The journal publishes the high quality papers within the journal scope:

     ♦ Environmental loads and effects,
     ♦ Spot/Periodic/Permanent/Online monitoring,
     ♦ Identification/Diagnosis/Assessment/Decision analysis,
     ♦ Design/Retrofit/Maintenance/Renewal/Risk management
     ♦ and related areas of structural engineering.

Editorial Board
Prof. Francis T.K. Au University of Hong Kong Pokfulam Road, Hong Kong Dr. Dong Bo Inst for Infocomm Res(I2R) 138632, Singapore Prof. Oreste S. Bursi Univ of Trento Trento 77-38123, Italy Prof. Elsa de Sá Caetano University of Porto 4200-465 Porto, Portugal Prof. Steve C.S. Cai Louisiana State University LA 70803, USA Prof. Joan R. Casas Technical Univ of Catalunya Barcelona 08034, Spain Prof. Necati Catbas niv of Central Florida FL 32816-2450, USA Prof. Eleni Chatzi ETH CH-8093 Zürich, Switzerland Prof. Gian Paolo Cimellaro Politecnico di Torino 10129 Turin, Italy Dr. C.F. Cremona SETRA Cedex 77487, France Dr. Marco Domaneschi Politecnico di Torino 10129 Turin, ltaly Prof. Lev Eppelbaum Tel Aviv University Tel Aviv 69978, Israel Prof. M.S. Fallahnezhad Yazd University Yazd, Iran Prof. Spilios D. Fassois University of Patras Patras GR-26504, Greece Prof. Branko Glišic Princeton University Princeton, NJ 08544, USA Prof. Stefan Hurlebaus Texas A&M University TX 77843-3136, USA Dr. Sakdirat Kaewunruen RailCorp - Track Eng. Sydney NSW2000, Australia Prof. Sher Bahadar Khan King Abdulaziz University Jeddah 21589, Saudi Arabia	Prof. C.W. Kim Kyoto University Kyoto 606-8501, Japan Prof. Nam-Sik Kim Pusan Nat'l University Pusan 609-735, Korea Prof. Jung Sik Kong Korea University Seoul 136-701, Korea Prof. Tribikram Kundu Univ of Arizona AZ 85721, USA Prof. Ying Lei Xiamen Univ Fujian 361005, China Prof. Hui Li Harbin Inst. of Tech. Harbin, 150001, China Prof. Qiu-Sheng Li City Univ of Hong Kong Kowloon, Hong Kong Prof. Kenneth J. Loh Univ of California CA 95616-5294, USA Prof. Paolo Maria Mariano Univ of Firenze Firenze I-50139, Italy Prof. Alessandro Marzani Univ of Bologna Bologna 40136, Italy Prof. Aldo Minardo Second Univ. of Naples 81031 Aversa, Italy Prof. Won-Bae Na Pukyong Nat'l University Pusan 608-737, Korea Prof. Tomonori Nagayama Univ of Tokyo Tokyo 113-8654, Japan Prof. Yi-Qing Ni The Hong Kong Polytechnic U. Kowloon, Hong Kong Prof. Shamim Pakzad Lehigh University Bethlehem, PA 18015-4729, USA Prof. Costas Papadimitriou Univ of Thessaly Pedion Areos 38334, Greece Prof. Gyuhae Park Chonnam Nat'l University Gwangju 500-757, Korea Prof. Carlo Pellegrino Univ of Padova 9-35131 Padova, Italy	Prof. Costas P. Providakis Technical U. Crete Chania GR-73100, Greece Prof. Pizhong Qiao Washington State University WA 99164-2910, USA Prof. B.N. Rao Indian Inst of Tech Madras Chennai 600036, India Prof. Salvatore Salamone Univ at Buffalo NY 14260, USA Prof. Gangbing Song Univ of Houston TX 77204-4006, USA Dr. Jyoti K. Sinha University of Manchester Manchester, M13 9PL, UK Prof. Christos Spitas Delft Univ of Technology Delft 2628CE, Netherlands Prof. Wieslaw J. Staszewski AGH University of Sci. and Tech. 30-962 Krakow, Poland Prof. A.D. Tsonos Aristotle Univ of Thessaloniki Thessaloniki GR 54124, Greece Prof. Humberto Varum Univ of Aveiro 3810-193 Aveiro, Portugal Prof. Volkovas Vitalijus Kaunas Univ. of Technology 44312 Kaunas, Lithuania Prof. Jinling Wang Univ of New South Wales Sydney NSW 2052, Australia Prof. Qing Wang Shandong Univ. of Sci.Technol Qingdao 266590, China Prof. Zhishen Wu Ibaraki University Ibaraki 316-8511, Japan Dr. Ruqiang Yan Southeast University Nanjing 210096, China Prof. Ka-Veng Yuen Univ of Macau Macao, China Prof. Hyun Do Yun Chungnam Nat'l University Daejeon 305-764, Korea Prof. Daniele Zonta University of Trento 38123 Trento, Italy

Guide to Authors (Last updated: Jan 16, 2020!)

1. Submission of the paper

Authors are asked to submit manuscripts in PDF (or Latex) format electronically through the Techno-Press Manuscript Upload System (TeMUS) (http://www.techno-press.com/papers). Exceptionally, the special issue papers may be directly submitted to the Guest Editor. If you have difficulties in using TeMUS, please contact us at[[email protected]]. On receiving submitted papers, the system will issue the paper ID and Password to the corresponding author which may be conveniently used to check the status of submitted papers. Authors should carefully check if their paper satisfied all the requirements in the preliminary list before submission.

2. Preparation of the manuscript

General : The manuscripts should be in English and typed with single column and single line spacing on single side of A4 paper. Submitted papers will be published in regular technical paper only. The first page of an article should contain; (1) a title of paper which well reflects the contents of the paper (Arial, 16pt), (2) all the name(s) and affiliations(s) of authors(s) (Arial, 12pt), (3) an abstract of 100~250 words (Times New Roman, 11pt), (4) 5-10 keywords following the abstract, and (5) footnote (personal title and email address of the corresponding author (required) and other authors' (not mandatory)). The paper should be concluded by proper conclusions which reflect the findings in the paper. The normal length of the technical paper should be about 12-24 journal pages. There will be no page charges and no other fees unless the author wishes to provide an open access to his article. Authors are advised to read the details in the Authors' Guide for guide and Template.
Tables and figures : Tables and figures should be consecutively numbered and have short titles. They should be referred to in the text as following examples (e.g., Fig. 1(a), Figs. 1 and 2, Figs. 1(a)-(d) / Table 1, Tables 1-2), etc. Tables should have borders (1/2pt plane line) with the captions right before the table. Figures should be properly located in the text as an editable image file (.jpg) with captions on the lower cell. All of the original figures and tables are required to be placed at the suitable locations in the text.
Units and mathematical expressions : It is desirable that units of measurements and abbreviations should follow the System Internationale (SI) except where the other unit system is more suitable. The numbers identifying the displayed mathematical expression should be placed in the parentheses and referred to in the text as following examples (e.g., Eq. (1), Eqs. (1)-(2)). Mathematical expressions must be inserted as an object (set as Microsoft Equations 3.0) for Microsoft Word 2007 and after versions. Image-copied text or equations are not acceptable unless they are editable. The raised and lowered fonts cannot be used for superscription and subscription.
References : A list of references which reflect the current state of technology in the field locates after conclusions of the paper. For details to prepare the list of references and cite them in the text, authors are advised to follow the introduction and the sample list in the Authors' Guide.

3. Review

All the submitted papers that have passed the preliminary check by the editors will undergo a rigorous peer-review process to judge their significance and originality. Those papers positively recommended by at least two expert reviewers will be finally accepted for publication in the Techno-Press Journals or after any required modifications are made.

4. Proofs

Proofs will be sent to the corresponding author to correct any typesetting errors. Alterations to the original manuscript will not be accepted at this stage. Proofs should be returned within 48 hours of receipt.

5. Copyright

Submission of an article to a Techno-Press Journal implies that it presents the original and unpublished work, and not under consideration for publication elsewhere. On acceptance of the submitted manuscript, it is implied that the copyright thereof is transferred to the Techno-Press. The Agreement of Authorship, Originality, and Copyright Transfer must be signed and submitted.

6. Ethics

General: Techno-Press applies research and publication ethics standards based on COPE's International Standards for Editors and Authors (https://publicationethics.org/node/11184). Violation of publication ethics will result in the activation of COPE flow chart. (https://publicationethics.org/guidance/Flowcharts)
Authorship: Authors are encouraged to check ICMJE's guideline for authorship. (http://www.icmje.org/icmje-recommendations.pdf). Authorship problems will be dealt with according to COPE flowcharts. (https://publicationethics.org/authorship)

7. Publication Fee

Except for open access articles, there is no page charge or article processing fee for submission and publication in this journal.

Inaugural Issue yet to come.

Table of Contents


		2020 Volume 7 No. 1	No.2 No.3
		2019 Volume 6 No. 1	No.2 No.3 No.4
		2018 Volume 5 No. 1	No.2 No.3 No.4
		2017 Volume 4 No. 1	No.2 No.3 No.4
		2016 Volume 3 No. 1	No.2 No.3 No.4
		2015 Volume 2 No. 1	No.2 No.3 No.4
		2014 Volume 1 No. 1	No.2 No.3 No.4

Subscription

2020 Subscription Rates

USD
Structural Monitoring and Maintenance Volume 7 (4 issues)	Print +e		Online +c		Airmail*
Institutional Subscription		398		300	+35

Orders are accepted by calendar year only.

1. PRINT+e: Print plus Free Access to the current online articles for the length of subscription until the subscription ends.
2. ONLINE+c: Access to the current online articles plus Complimentary Access to the articles since the start of journal or as specified otherwise. The access to the articles of paid subscription period will be guaranteed after termination of subscription.
3. Personal Subscription Rates : Please inquire at [email protected].

\| Home \| Aims and Scope \| Editorial Board \| Table of Contents \| Subscription \| Guide to Authors \|